Loading ...
— 2 —
Before You Begin
Required Tools
•
Tape measure
•
Pencil (NOT ink)
•
Putty knife
•
Scissors
•
Adjustable wrenches
•
Sealant drill and 1/2 inch (or larger) drill bits
•
Plumber's putty or Caulk
•
Caulking Gun
•
Silicone adhesive sealant
•
Rags
•
Denatured alcohol
•
Ear protection
•
Eye protection
•
Gloves
•
Hacksaw/jigsaw
•
Wood braces
•
Framing square
•
Shims
General Recommendations:
Product failure due to the disregard of the manufacturer’s instructions or guidelines, is not covered under the Warranty.
•
•
•
•
Read installation and maintenance instructions, thoroughly before installation.
Inspect your sink for any noticeable damage before installation.
Be sure to use proper tools and always wear personal safety accessories for your protection.
Check all local applicable plumbing and building codes.
WARNING:
Risk of personal injury or product damage. Handle with care. Material can break or chip if the product is handled
carelessly. Metal edges may be sharp. Use gloves when handling.
Be sure to use proper tools and always wear personal safety devices for your protection.
Package Contents
IMPORTANT:
1. Installation must be done by a qualified, licensed plumber. The contractor must perform a dry fit prior to
drilling holes in the countertop for the sink.
2. Drill hole size in countertop for the lavatory is Φ 1 3/4 inch (4.4 cm).
3. All vessel bowls are hand made. You may expect variations in color, texture and bowl symmetry. If you notice any
obvious variation or defects, you should contact your retailer immediately.
4. Though resistant to breakage, vessel sinks can break or chip when a heavy object falls in or on them.
Lavatory
Loading ...
Loading ...
Loading ...