Loading ...
Loading ...
Loading ...
7
2. Setting Desired Temperature
Adjust the desired temperature by pressing the
Up/Down arrows on the control panel or remote control.
Desired temperature options vary from 59℉ to 86℉.
Once you have chosen the desired temperature, the
heater will remain on until the room temperature
increases to the temperature on the digital display. The
heater will cycle on and off to maintain the desired room
temperature.
3. Setting the POWER OFF TIMER Function
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a
certain set time, and can only be set while the heater’s display is in the “On” position.
Turn the heater to the “On” position .Press the Timer
button on the heater’s control panel or the remote.
The digital display changes from the “temperature” to
the “hours” option for the timer. Continue to press the
timer button to change the number of hours you would
like the heater to run before powering itself off .The
hour options for the timer are from 0 to 12 hrs. (in 1 hr
increments).
The selected hour increments will flash for a few
seconds, then revert back to the set desired
temperature. The heater will power OFF when the
internal heater clock counts down the hour increments
you set.
4. Setting the POWER-ON-TIMER Function
Note: The Power-ON-Timer Function will allow for the heater to power ON after a
certain set time, and can only be set while the heater’s display is in the “Off” position.
Turn the heater to the “OFF” position .Press the Timer
button on the heater’s control panel or the remote.
The digital display shows the “hours” option for the
timer. Continue to press the timer button to change the
number of hours you would like the heater’s internal
clock to count down before powering itself on .The
hour options for the timer are from 0 to 12 hrs. (in 1 hr
increments).
As long as a timer is set, the digital screen will always
display the timing time. The heater will power itself ON
when the internal heater clock counts down the hour
increments you set.
Loading ...
Loading ...
Loading ...