Candy CF 3E9L0B-80 Dishwasher Rapido'

User Manual - Page 29

For CF 3E9L0B-80.

PDF File Manual, 44 pages, Read Online | Download pdf file

CF 3E9L0B-80 photo
Loading ...
Loading ...
Loading ...
EN
The end of the program will be indicated by
3 signals lasting 3 seconds interspersed
with a pause of 20 seconds, after one
minute the dishwasher will switch off at the
same time on the display. the word "END"
will appear for one minute.
This button can be used to select two
different functions, depending on the
selected programme:
"HALF LOAD" button
(only on some models).
Appositely developed for small lightly soiled
loads that fits approximately half of the
dishwasher’s capacity. By selecting this
option, you can save time, energy, and
water. After selecting the program, press
the "HALF LOAD"
button and the
indicator light will turn on. If this option is
not compatible with the set program, a
sound will be heard.
"TABLETS" button
(only on some models).
This option optimises the use of the
"TABLETS" ("3 in 1"/"4 in 1"/"5 in 1", ecc.)
combined detergents. By pressing this
button, the selected washing programme is
modified to get best performance from
combined detergents (furthermore, the salt
and rinse aid shortage lights are de-
activated). After selecting the program,
press the "TABLETS"
button for 5 sec.
and the indicator light will turn on.
If this option is not compatible with the set
program, a sound will be heard.
This model is provided with an indicator
light on the control panel which will light up
when it is necessary to reload the salt
container.
After filling the salt container, press this
button for a few seconds, until the
corresponding indicator light switches off.
In order to guarantee the correct
functioning of the salt indicator light,
YOU MUST ALWAYS FULLY REPLENISH
THE SALT CONTAINER.
WARNING:
If you press the reset button without
filling the salt container, this will
interfere with the correct functioning
of the salt indicator light.
"RESET" button for "NO
SALT" indicator light (only in
models with a salt indicator
light reset button)
"NO SALT" indicator light
This option is recommended when
using the RAPID programme, whose
duration will be extended, enabling
improved performance from the
detergent tablets.
WARNING:
Once selected, this option keeps
being on (light on) also for next
washing cycles and it can be de-
activate (light off) only by pressing the
button once again for 5 second.
HALF LOAD/TABLETS Option
button
Only for models with the AUTO DOOR"
option, during the drying phase the
door will open automatically and you
will have to wait until for the end-of-
cycle signal before removing the dishes.
Programme end
Loading ...
Loading ...
Loading ...