Loading ...
Loading ...
Loading ...
28
15.
PROGRAMME SELECTION
AND SPECIAL FEATURES
To turn the appliance on and off, press
the ON/OFF button.
Open the door and place the dirty dishes
inside the appliance.
Press the "ON/OFF" button. The
indicator light associated with the "ECO"
programme or stored programme will flash.
Select a different programme by pressing
the "PROGRAMME SELECTION"
button. The indicator light associated with
the selected programme will flash.
To select an option, press the
corresponding button (the indicator light
will turn on).
Press the "START/RESET" button
(the indicator light associated with the
programme selected will stop flashing
and remain on).
When the door is shut, after an audible
signal has sounded, the programme will
start automatically.
If there is any break in the power supply
while the dishwasher is operating, a
special memory stores the selected
programme and, when the power is
restored, it continues where it left off.
Some programmes use an impulse or
intermittent washing system (depending on
the model) which reduces consumption,
noise and improves performance.
Opening the door when a programme is
running is not recommended especially
during the main wash and final hot rinse
phases. However, if the door is opened
while a programme is running (for example, to
add dishes) the machine stops automatically.
Close the door,
without pressing any
buttons
.
The cycle will start from where it left off.
If you wish to change or cancel a
programme already in progress, proceed as
follows:
Hold the "RESET" button for at least 3
seconds. Several audible signals will
sound and the programme indicator lights
will turn on and off individually and in
sequence.
The indicator light associated with the
"ECO" programme or stored programme
will flash.
At this point a new programme can be set.
WARNING:
Before starting a new programme, you
should check that there is still detergent
in the dispenser. If necessary, top up the
dispenser.
Changing a running programme
WARNING:
If you open the door during the drying
cycle, an audible audio signal advises
you that the drying cycle has not yet
finished.
Interrupting a Programme
The "intermittent" working of the washing
pump is NOT to be considered a
malfunction; it is a characteristic of
impulse washing, and therefore
should be considered a normal feature
of the programme.
"IMPULSE"or "INTERMITTENCE"
programmes (only on some
models)
Programme settings
ON/OFF button
Loading ...
Loading ...
Loading ...