Loading ...
Loading ...
Loading ...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
20
Instructions (Cont.)
At the end of the program
• At the end of each program, the appliance enters a 5-10 minute cool-down phase
during which cold air is circulated around the drum. This will ensure items are left at
a temperature that will not damage them.
• A buzzer sounds at the end of the program to remind you to unload the dryer.
• If the laundry is not removed at the end of the cycle,the dryer performs an anti-
creasing phase for a maximum of 30 minutes.
• If you do not remove the laundry, the dryer will stop automatically at the end of the
anti-creasing phase, and enter standby mode. The display light “Filter” will ligh up,
as a reminder to clean the lint fiilter.
• Once the laundry has been removed, set the program selector dial to “O” to switch
off the machine.
• Unplug the machine after each use.
Resetting the thermostat
When the dryer does not heat, try resetting the unit by pressing the RESET button
at the back of the unit (Fig. 9). This will activate the thermostat in order to reheat the
element.
Fig. 9
Loading ...
Loading ...
Loading ...