Loading ...
Loading ...
Loading ...
12
3. Press and release the
MUTE button.
4. Press and release the VOL - button.
The red indicator light
will blink twice and go off.
To make sure the Master Volume Feature
is disabled, put the remote in TV mode if
youprogrammedthecableboxtobethe
Master Volume Device. Point the remote
at the TV and press a volume button.
If the volume changes on the TV, the
feature is disabled. If the volume on the
cableboxchanges,andnottheTV,you
will have to repeat the steps above and
test again.
Reset to Factory Settings
1. Press and hold the SETUP button
until the red indicator stays on
(approximately2seconds)andthen
release the button.
2. Press and release the OK button.
3. Press and release the number #0
button. The red indicator light will
flash twice.
Master Volume Feature, cont.
Loading ...
Loading ...
Loading ...