Loading ...
Loading ...
Loading ...
11
Master Volume Feature
Master Volume Feature
The Master Volume Feature allows you to select a
single device (TV or audio receiver) that the volume
controlalwayscontrols.Forexample,theremotecan
be in TV mode while the volume buttons control the
volumeonyourcableboxinsteadofyourTV.
Enabling the Master Volume Feature
1. Press and hold the SETUP button
until the red indicator stays on
(approximately2seconds)andthen
release the button.
2. Press and release desired device
button (TV, DVD, CBL) for the device
you wish to control the volume.
3. Press and release the
MUTE button.
4. Press and release the VOL + button.
The red indicator will blink twice and
then go off.
To test the feature put the remote in
another mode such as the TV mode if
youprogrammedthecableboxtobethe
Master Volume Device. Point the remote
atthecablebox,pressandholdeither
the VOL + or the VOL - button. If the cable
boxvolumechangesthentheremoteis
programmed correctly. If the TV volume
changesandnotthecablebox,youwill
have to repeat the steps above and test
again.
Disabling the Master Volume Feature
1. Press and hold the SETUP button
until the red indicator stays on
(approximately2seconds)andthen
release the button.
2. Press and release the device button
(TV, DVD, CBL) which is programmed
to control the Master Volume Feature.
Loading ...
Loading ...
Loading ...