Loading ...
Loading ...
Loading ...
English | 33
Problem Possible Cause Corrective Measure
Mower does not always go in a straight line
when travelling between areas
No corrective action needed.
Mower frequently does not find right posi-
tion or turns on the spot
Change wire ID.
Wire crossed while marking an object Follow instructions in the Installation Guide.
Mower runs in random paths in an addi-
tional lawn without docking station.
Normal behaviour. The LogiCut system only works in
areas with docking station.
Perimeter wire keeps
being cut
Wire is not taut between pegs
Distance between pegs is more than 75cm
Make wire taut and ensure distance between pegs is
maximum 75 cm. Follow instructions in the Installation
Guide. Use the wire connectors to repair the cut.
Mower leaves ragged
finish/poor quality of
cut
The mower does not mow often enough Mow more frequently for a good result (e.g. by means of
more/longer slots in schedule).
Cutting blades blunt
Reverse or replace cutting blades (see figure J).
Possible clogging Always turn isolator switch off first, then check under-
neath the mower. Clear out as necessary (always wear
protective gloves).
Perimeter wire not
detected
No power at the docking station Check if the docking station is powered up (LED is on).
Perimeter wire damaged/cut Check perimeter wire for damage.
Wrong installation (e.g. not enough dis-
tance between wires)
Follow instructions in the Installation Guide.
Perimeter wire close to a source of interfer-
ence
Remove any excess (e.g. coiled up) perimeter wire
around the docking station. Change perimeter wire ID in
the menu.
Height-of-cut button
stuck
Possible clogging Always turn isolator switch off first, then check under-
neath the mower. Clear out as necessary (always wear
protective gloves).
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the mower.
It is possible, that the software version of your mower is re-
quired (see „Menu > Settings > Info“).
If the mower is requested to be sent to the service centre,
the mower and docking station must always be sent to-
gether. Do not remove the battery.
Before sending in, remove any personalised top cover that
may have been fitted and any accessory cover.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Bosch Power Tools F 016 L94 038 | (11.11.2020)
Loading ...
Loading ...
Loading ...