Waldorf RNB8100G-B Bold 900mm Gas Target Top Bench Model

Installation Operation Manual - Page 5

For RNB8100G-B.

PDF File Manual, 30 pages, Read Online | Download pdf file

RNB8100G-B photo
Loading ...
Loading ...
Loading ...
3
RN[1]8100G - [2] Gas Target Top, 900mm wide.
NOTE:
[1]: - Model Options;
- - Standard.
L - Low Back.
B - Bold Front.
LB - Low Back and Bold Front.
[2] - Base Stand Options;
B - Bench Mount.
CB - Cabinet Base.
LS - Leg Stand.
RB - Refrigerated Base.
A commercial heavy duty, gas fired Target Top having a high output, two stage double-ring cast iron
burner offering accurate temperature control and infinitely variable heat with heat radiating out from
centre of Target Top. Main Burner is located underneath removable cast target top plates.
Target Top is constructed as a hob unit and is available on Leg Stand (-LS), Bench Mount (-B),
Cabinet Base (-CB) or to fit on a Refrigeration Base Unit (-RB).
- Australia:
- New Zealand:
- UK Only:
Category: II
2H3P.
Flue Type: A
1.
(*) Measure Burner operating pressure at target top hob manifold test point with target top burner (Inner and Outer rings)
operating at full setting. Operating pressure is ex-factory set, through appliance regulator and is not to be adjusted,
apart from when carrying out gas conversion, if required. (Refer to details in Gas Conversion section for
information).
Input Rating (N.H.G.C.) 45 MJ/hr 45 MJ/hr
Supply Pressure 1.13 - 3.40 kPa 2.75 - 4.50 kPa
Burner Operating Pressure (*) 1.0 kPa 2.6 kPa
Gas Connection ¾BSP Male
Input Rating (N.H.G.C.) 45 MJ/hr 45 MJ/hr
Supply Pressure 1.13 - 3.40 kPa 2.75 - 4.50 kPa
Burner Operating Pressure (*) 1.0 kPa 2.6 kPa
Gas Connection ¾BSP Male
Heat Input (nett)
Nominal 11.5 kW 11.5 kW
Reduced 4.7 kW 7.9 kW
Pilot 200 W 200 W
Gas Rate (nett)
Nominal 1.22 m
3
/hr 0.89 kg/hr
Reduced 0.50 m
3
/hr 0.61 kg/hr
Pilot 0.02 m
3
/hr 0.02 kg/hr
Supply Pressure 20 mbar 37 mbar
Burner Operating Pressure (*) 9.9 mbar 26.8 mbar
Gas Connection
3
/
4
B.S.P. Male
Loading ...
Loading ...
Loading ...