Loading ...
Loading ...
Loading ...
-12-
Extension Cords
Service
NO USER
SERVICE ABLE
PARTS INSIDE. Preventive
maintenance performed by un au -
thorized personnel may result in
misplacing of internal wires and
components which could cause serious
hazard. We recom mend that all tool
service be performed by a Dremel
Service Center. SERVICE MEN:
Disconnect tool and/or charger from
power source before servicing.
Batteries
Be alert for battery packs that are
nearing their end of life. If you notice
decreased tool performance or
significantly shorter running time
between charges then it is time to
replace the battery pack. Failure to do
so can cause the tool to operate
improperly or damage the charger.
Cleaning
Certain cleaning
agents and
solvents damage plastic parts. Some of
these are: gasoline, car bon
tetrachloride, chlorinated cleaning
solvents, ammonia and household
detergents that contain ammonia.
Ventilation openings and switch levers
must be kept clean and free of foreign
matter. Do not attempt to clean by
inserting pointed objects through
opening.
Maintenance
If an extension
cord is
necessary, a cord with adequate size
conductors that is capable of carrying
the current necessary for your tool
must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use
3-wire extension cords that have 3-
prong plugs and receptacles.
NOTE: The smaller the gauge number,
the heav i er the cord.
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
To avoid accidents, always disconnect the tool and/or charger from
the power supply and turn variable speed dial to "0" position
before cleaning.
Tool’s
Ampere
Rating
Cord Size in A.W.G. Wire Sizes in mm
2
Cord Length in Feet Cord Length in Meters
25 50 100 150 15 30 60 120
3-6
6-8
8-10
10-12
12-16
18
18
18
16
14
16
16
16
16
12
16
14
14
14
–
14
12
12
12
–
0.75
0.75
0.75
1.0
–
0.75
1.0
1.0
2.5
–
1.5
2.5
2.5
4.0
–
2.5
4.0
4.0
–
–
Recommended materials for use:
• Cardboard
Maximum thickness: 1/4"
• Plastic Packaging
• Fabric
• Foam Boards
• Paper goods
Materials not recommended:
• Metal wires
• Sheet metal
• Sand paper (abrasive materials)
Material Usage
Loading ...