Loading ...
Loading ...
Loading ...
-10-
Turning On/Off Scissors
To turn on tool: slide variable speed dial
4 in left direction to desired speed (you
will hear audible click) (Fig. 2), pull
trigger 3 to turn on tool.
To turn off tool: release trigger 3, slide
variable speed dial 4 in right direction to
"0" position (you will hear an audible
click) (Fig. 3).
Rotate variable
speed dial to
"0" position whenever tool is not being
used. This will reduce the risk of fire,
personal injury and property damage.
Operating Instructions
Ensure tool is turn off before making any assembly, adjustments
or changing accessories. Such preventive safety measures reduce
the risk of starting the tool accidentally.
ON
Fig. 2
While charging, the battery status
indicator will blink green, transitioning
to steady green when charging is
complete.
IMPORTANT CHARGING NOTES
– Lithium-ion battery will hold its charge
while in storage for up to 2 years so it’s
always ready when you need it.
– The charger was designed to charge the
battery only when the battery
temperature is between 41˚F (5˚C) and
113˚F (45˚C).
– A substantial drop in operating time per
charge may mean the internal battery
pack is nearing the end of its life and
the tool should be replaced. Contact
Dremel customer service at 1-800-4-
DREMEL if there are questions.
– If battery does not charge properly:
a. Check for voltage at outlet by
plugging in some other electrical
device.
b. Check to see if outlet is connected
to a light switch which turns power
“off” when lights are turned off.
c. Check to see if USB cable is
properly connected to the tool and
the power adapter.
d. If you still do not get proper
charging, send tool and power
adapter to your Dremel Service
Center.
Note: Use of power adapters or battery
packs not sold by Dremel may void the
warranty.
Charging Behavior
LED Charge Status
Flashing Green Charging
Solid Green Charge Complete
Charging the Tool
O
OFF
Fig. 3
Loading ...
Loading ...
Loading ...