Loading ...
Loading ...
Loading ...
14
7. Check gas operating pressure is as shown in the
‘Specifications’ section.
NOTE: Measure Burner operating pressure at
target top hob manifold test point with
target top burner (Inner and outer ring)
operating at full setting.
8. Verify operating pressure remains correct.
NOTE: This appliance is fitted with adjustable feet
to enable appliance to be positioned
securely and level. This should be carried
out on completion of gas connection.
Before leaving new installation;
1. Check the following functions in accordance with operating instructions specified in ‘Operation’
section of this manual.
Light the Pilot Burner.
Light the Main Burner.
Check the Low Fire burner operation.
Check the High Fire burner operation.
2. Ensure the operator has been instructed in areas of correct lighting, operation and shutdown
procedure for appliance.
This manual must be kept by the owner for future reference, and a record of
Date of Purchase,
Date of
Installation
and
Serial Number of Appliance
recorded and kept with this manual. (These details can
be found on Rating Plate. Refer to ‘Dimensions’ section for Rating Plate location for all
models).
NOTE: If for some reason it is not possible to get appliance to operate correctly, shut ‘Off’ gas
supply and contact supplier of this appliance.
Gas Pressure
Test Point
Fig 3
For Refrigeration Cabinet Installation details, refer to Refrigeration Cabinet Installation and
Operation Manual supplied with appliance.
Loading ...
Loading ...
Loading ...