Loading ...
Loading ...
Loading ...
Starting A program
1.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refers to last pageProduct fiche.
Make sure that the water supply is turned on to full pressure.
4. Open the door, press the Power button.
5. Choose a program, the response light will turn on. Then close the door, the
dishwasher will start its cycle.
Saving Energy
1. Pre-rinsing of tableware items leads to increased water and energy consumption
and is not recommended.
2. Washing tableware in a household dishwasher usually consumes less energy and
water in the use phase than hand dishwashing when the household dishwasher is
used according to the instructions.
Changing The Program Mid-cycle
A program can only be changed if it has been running only for a short period of
time, otherwise the detergent may have already been released or the wash water
with detergent has already been drained. If this is the case, the dishwasher needs
to be reset and the detergent dispenser must be refilled. To reset the dishwasher,
follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press Program button more than three seconds the machine will be in
program selection mode.
3. You can change the program to the desired cycle setting.
Auto
and
Draw out the lower and upper basket, load the dishes and push them back.
It is recommended to load the lower basket first, then the upper one.
Loading ...
Loading ...
Loading ...