Loading ...
Loading ...
Loading ...
Water Supply And Drain
Cold water connection
Connect the cold water supply hose to
a threaded 3/4 inch connector and
make sure that it is fastened tightly in
place.
If the water pipes are new or have not
been used for an extended period of
time, let the water run to make sure
that the water is clear. This precaution
is needed to avoid the risk of the
water inlet to be blocked and damage
the appliance.
ordinary supply hose
About the
The consists of the double walls. The
the supply hose breaking and
the outer corrugated hose is
full of water.
How to onnect the
1. Pull the completely out from storage compartment
rear of dishwasher.
2. Tighter the screws of the to the faucet with thread 3/4 inch.
3. Turn water fully on before starting the dishwasher.
WARNING
A hose that attaches to a sink spray can burst if it is installed on the same
water line as the dishwasher. If your sink has one, it is recommended that
the hose be disconnected and the hole plugged.
How to disconnect the
1. Turn off the water.
2. Unscrew the from the faucet.
Anti-Flood water
suppoly hose (AquaStop)
Anti-Flood water supply hose (AquaStop)
Anti-Flood water supply hose (AquaStop)
Anti-Flood water supply hose (AquaStop)
Anti-Flood water supply hose (AquaStop)
hose's system guarantees its
intervention by blocking the flow of water in case of
when the air space between the supply hose itself and
ti-ood water supply hosean l
f
located at
ti-ood water supply hosean l
f
ti-ood water supply hosean l
f
Loading ...
Loading ...
Loading ...