Kenmore 66595025100 Self-Cleaning Electric Range

Use & Care Guide - Page 17

For 66595025100. Also, The document are for others Kenmore models: 665.92022, 665.95022, 665.92024, 665.95024, 665.92029, 665.95029

PDF File Manual, 23 pages, Read Online | Download pdf file

66595025100 photo
Loading ...
Loading ...
Loading ...
4. Press SERVE WARM.
A one hour warm time will automatically be set.
5.
Set the warm temperature (optional),
Press the TEMP "up" or "down" arrow pad to raise or lower
the temperature in 5°F (3°C) amounts to set a temperature
other than 150°F (66°C). The warm range is 100°F-200°F
(38°C-93°C).
6. Press START/ENTER.
The display will show the cook time counting down. When
cook time ends, the display will show a warming time.
When warming time ends, the oven will automatically shut off
and "End" and COOK TIME will show on the display. Four
tones will sound and then four 1-second repeater tones will
sound every minute thereafter.
7. Press OFF/CANCEL or open the oven door to stop reminder
tones and remove "End" from display. The time of day will
return to the display.
Timed Ove Controi
Food Poisoning Hazard
Do not let food sit in oven more than one hour
before or after cooking.
Doing so can result in food poisoning or
sickness.
The Timed Oven Control allows the oven to be set to turn on at a
certain time of day, cook for a set length of time, and/or shut off
automatically. Delay start should not be used for foods such as
breads and cakes because they may not bake properly.
To Set a Cook Time:
Before setting, make sure the clock is set to the correct time of
day. See "Clock" section.
1. Press BAKE.
Press the TEMP "up" or "down" arrow pad to set a
temperature other than 350°F (177°C).
2. Press COOK TIME.
3. Press the HOUR/MIN "up" or "down" arrow pads to enter the
length of time to cook.
4. Press START/ENTER.
The start time and stop time countdown v#ill appear on the
oven display. The display will count down the baking/roasting
time in hours and minutes (if cook time is more than 1 hour),
or in minutes and seconds (if cook time is less than 1 hour).
The temperature of time settings can be changed any time
after pressing START/ENTER by repeating steps 1 and 3.
When the stop time is reached, the oven will shut off
automatically and "End" and COOK TIME will appear on the
oven display.
Four tones will sound, then four 1-second reminder tones will
sound every minute thereafter.
5. Press OFF/CANCEL or open the oven door to remove "End"
from display. The time of day will appear on the display.
To Set a Cook Time and Stop Time [Delay Start]:
1. Press BAKE.
Press the TEMP "up" or "down" arrow pad to set a
temperature other than 35g°F (177°C).
2. Press COOK TIME.
3. Press the HOUR/MIN "up" or "down" arrow pads to enter the
length of time to cook.
4. Press DELAY START.
5. Press the HOUR/MIN "up" or "down" arrow pads to enter the
time of day to start.
6. Press START/ENTER.
The start time is automatically calculated and displayed.
"DELAY" and the stop time will also appear on the oven
display.
When the start time is reached, the oven will automatically
turn on.
Press the TEMP "up" or "down" arrow pad to set a
temperature other than 350°F (177°C).
Four tones will sound, then four 1-second reminder tones will
sound every minute.
7. Press OFF/CANCEL or open the oven door to remove "End"
from display. The time of day will appear on the display.
To Recall Programmed Timed Settings:
To Recall Set Press Displayed 5
Seconds
Cook Time COOK TIME* set length of cook
time
Delay Start DELAY START set delay start time
Temperature BAKE set temperature
*If cook time has begun, when DELAY START is pressed, the
display will show the time it started. When COOK TiME is
pressed, the display will remove the seconds from the remaining
countdown time.
To Change Programmed Timed Settings
To Change Set Press Setting Displayed
Cook Time COOK TiME Press HOUR/MIN
"up/down" arrow
Press START/
ENTER
Delay Start* DELAY START
Press HOUR/MIN
"up/down" arrow
Press START/
ENTER
Temperature BAKE Press TEMP "up/
down" arrow
Press START/
ENTER
*Cannot change the set delay start time once it has been
reached.
m
17
f-
Loading ...
Loading ...
Loading ...