Loading ...
Loading ...
Loading ...
8 9
CONNECT THE LPG CYLINDER
(only for LPG oven)
Connect the exible hose to the back of the oven.
PRESSURE REGULATOR :
Liquid Propane Gas (LPG):
11.0” Max water column pressure (W.L.P.)
Natural Gas (NG):
4.0” Max water column pressure (W.L.P)
FLEXIBLE HOSE:
Diameter 1/2ʺ”
CYLINDER
Recommended Type 1 20lb, 30lb, or larger
Pressure regulator, exible hose and cylinder are
not supplied with the oven.
LPG/NG CONNECTIONSLPG/NG CONNECTION WARNINGS
ONLY FOR LPG OVENS
- LPG is heavier than air. Any losses of LPG may collect in a lower part of the
environment.
- The LPG cylinder must always be installed, transported and stored in a vertical
position. Handle with care and do not drop the LPG cylinders.
- Make sure the gas tank is placed in a ventilated place that it is away from other
objects.
- Never store a spare gas cylinder near the gas oven.
- Do not leave or transport the LPG cylinders in places where temperatures can
reach 120°F/50°C (too hot to handle. For example: Do not leave the cylinder in the
car on hot days).
- Treat “empty” LPG cylinders with the same attention as full ones. Even if there is
no more liquid in the cylinder there may always be gas fumes.
- Always close cylinder valve before disconnect in gas there could still be pressure
- Always check all gas connections before using the oven.
- Make sure to use the proper PTFE gas piping tape for all threaded connections.
- It is recommended that all gas connections are checked before using the oven.
- Make sure that the valve on the LPG cylinder or the regulator is closed.
Replacement of the cylinder must be performed away from sources of heat and
ignition.
- Only use cylinders rated for LPG.
- Do not twist the hose.
- Before each use check that the hose does not have any marks, cracks, abrasions
or cuts. If the hose is damaged in some way, do not use the oven.
Use the supplied conversion kits if changing from factory settings
NATURAL GAS SUPPLY
– Connect the exible hose to the back of the
oven.
– The natural gas supply must be delivered
through a galvanized pipe Ø 1/2” or equivalent
copper pipe, located at the burner inlet hole.
– Install the gas shut-off valve in a suitable
position up-line.
ATTENTION!
Follow our advice to correctly use your oven.
– We recommend checking gas connection before using the oven.
– Make sure the gas tap is turned off when the oven is not being used and during
maintenance or cleaning operations.
– Before using the oven, check out the hose searching for cracks, cuts or any
wearing sign. If the hose is damaged, do not use the oven.
continue next page >>
Loading ...
Loading ...
Loading ...