Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
112
Tip: We recommend providing a place
to sit the coffee machine which is the
same height as the building-in niche.
This will make it easier to connect the
machine to the electricity and water
supply.
Connecting the plumbed-water and
electricity supplies
Observe the information under
“Plumbed-water connection” and
“Electrical connection”.
Connect the coffee machine to the
plumbed-water and electricity
supplies.
Pushing in and aligning the coffee
machine
When pushing the machine into the
niche, make sure that the electrical
and plumbed-water connections do
not get trapped or damaged.
Push the coffee machine all the way
into the niche until you feel a
resistance.
Check the height of the coffee
machine to make sure that it is sitting
centrally in the niche and that it is
level. Align the machine.
Never align the coffee machine by
adjusting the door hinges. This will
prevent the milk flask from attaching
correctly and interfere with the milk-
preparation process.
Screwing the coffee machine to the
cabinet
Open the appliance door.
FourTX20 (25mm) screwsare
supplied with the machine.
Secure the coffee machine to the side
walls of the cabinet using the screws
supplied. Start with the top-left
screw. Proceed in a clockwise
direction to tighten the other screws.
Tighten all screws by hand.
Carry out a functional check on the
coffee machine.
Loading ...
Loading ...
Loading ...