Loading ...
Loading ...
Loading ...
1. You must first select which side of the towel rail needs to be wired in. The heated towel rail within this
box has two wiring options (left or right hand). The location of existing wiring through or on the wall will
dictate which side you will use.
Your Goldair towel rail comes with a quick-connect cable allowing for easy pre-installation of the mains
power by your electrician – once you have selected either left or right side cable exit, ensure that the
blank cover is fitted tightly to the non selected side for water tightness.
2. Select desired spot to mount towel rail with at least 300mm
Upper Legs
clearance from all permanent objects in surrounding area. The
Ladder Towel Rail should be installed in accordance to local
governing New Zealand regulations. The Goldair Heated
Ladder Towel Rail can only be mounted 1 way with wiring at
the top.
3. Decide if you will use the internal or external floor mounts
as noted on the previous page.
4. Once you have selected your installation location – carefully
mark on the wall and floor with a pencil the location of the legs
by holding the towel rail in place temporarily. Ensure the towel
rail is square and that the legs on the floor are the right
distance from the wall to ensure the uprights are
perpendicular to the floor.
5. Mark the centers of the leg locations and then drill holes
suitable for the supplied fixing screws, if installing into Gib,
concrete or block, insert wall plugs into the hole.
6. Screw the mounting bushes into place where you have
drilled the holes, if you are using a concealed cable installation
you will need to use the included concealed wall lug – screw
through the smaller hole, the cable enters through the larger
hole.
7. Now fit the upper legs onto the wall lugs and secure into
place using the grub screws supplied.
8. Once all of your wall mounts and upper legs are correctly
installed, you can carefully lower the towel rail onto the floor
mounts and then into the wall mounts.
9. Fix the legs in place using the grub screws for the lower legs
and the supplied short screws on the upper legs.
Internal or External
Floor mount
Installation (continued)
Loading ...
Loading ...
Loading ...