Loading ...
Loading ...
Loading ...
52
DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO
Insert water spout The hot water
spout is not inserted
or is not inserted
correctly.
Insert the water spout as far as
it will go.
Insert milk container The milk container
is not inserted
correctly.
Insert the milk container as far as
it will go.
Insert infuser assembly The infuser has
not been replaced
after cleaning.
Insert the infuser as described in section
‘Cleaning the infuser’.
Water circuit empty
press ok to start
filling process
The water circuit
is empty.
Press
OK to deliver water from the spout
until it flows out normally. Delivery stops
automatically.
If the problem persists, make sure
the water tank is fully inserted.
Press ok to start
cleaning process
or turn milk froth
adjustment dial
The milk container
has been inserted
with the froth
adjustment dial in
the
CLEAN position.
To proceed with the CLEAN function,
press OK or turn the froth adjustment
dial to one of the milk positions.
Turn dial to
CLEAN position to
start cleaning
Milk has been
delivered recently
and the tubes
inside the milk
container must
be cleaned.
Turn the froth adjustment dial
to CLEAN.
Turn the milk froth
adjustment dial to
milk position
The milk container
has been inserted
with the froth
adjustment dial in
the
CLEAN position.
Turn the dial to the required
froth position.
Descaling needed press
ok to start (~45min)
The machine must
be descaled.
Press
OK to start descaling or BACK
to descale later. The descaling procedure
described in section ‘Descaling’ needs to
be performed.
Replace water filter
press
OK to start
The water softener
filter is exhausted.
Press OK to replace or remove
the filter, or BACK to carry out the
procedure later. Follow the instructions
in section ‘Water filter’.
ALERTS
Loading ...
Loading ...
Loading ...