Loading ...
Loading ...
Loading ...
- and ADJUSTMENT
SPOOL REPLACEMENT
•Stop motorand unplugpower cord.
• Push in button (marked "PUSH") toe°ted on head and remove
cover. Do not force. No tools needed. Use finger pressure only.
o Lift out spoo_and replace with new spool and line.
See RECOMMENDED REPLACEMENT PARTS & CAUTION
below,
-Keeping line tightly wound on spool, set spool into-head
housing, guiding approx.3to 4inches of line lhrough the
opening.
•Replace cover.
IF LINE DOES NOT FEED
•Stop motor and unplug power cord.
•Push inbutton (marked "PUSH") located on head and remove
cover and spool. Do not force. No tools needed. Use finger
pressure only:
• Check tomake sure lineiswound in direction indicated on
spool and that the spout isnot overfilled or jarnmed.
•Separate strands of tangled lineor install new line if
necessary.
,, Replace spool and cover.
REWINDING SPOOL
tStop motor and unplugpower cord.
t. Push in button (marked "PUSH") located on head and remove
cover. Do notforce. No tools are necessary. Use finger
pressure only.
= Lift out spoo! to rewlnd with new line.Remove any old linefrom
spool.
See RECOMMENDED REPLACEMENT PARTS & CAUTION
below.
Do notwind more than atotal of 17feet of line onto spool
•Secure new line tospool by slipping it into the tapered slot
(located in top of line spool)and sliding line towards the
narrow part of the slot.
.Wind the line side by side (donot crossover or crisscross) in
the direction indicated onthe spool. (Fig.9)
IMPORTANT: It you wind in the opposite direction, the linewill
not feed.
-Keeping line tightly woundon spool, set spool into head
housing, guiding approx. 3to 4 inches of linethrough the
opening.
•Replace cove_
NOTE: After rewinding, line may be held in position by
inserting the end of the line into the retaining slot.
FIG. 8
RG.9
TOOPENPUSHIN BUTTON
. , FTOFFCOVER
_COVER
OOL & LINE
HEAD'HOUSING
"PUSH"
_ BUTTON
\RET_NINGSLOT
TAPEREDSLOT
RECOMMENDED REPLACEMENT PARTS
AND ACCESSORIES
YourSEARS l_immer uses SPECIALLY TREATED.065 DIAMETER
MONOFILAMENT NYLON cutting, line which is available at
SEARS STORES AND CATALOG STORES. You may purchase a
•fugywound spool (Part No.85835) oryou may purchase a 100 foot
coil of line (Part No. 85772} or alarge bulk spool of line and rewind
your present spool.
CAUTION: The use of heavier line, different types of line and
accessories or attachments other than recommended may be
hazardous or cause unitfailure.
5
Loading ...
Loading ...
Loading ...