Loading ...
Loading ...
Loading ...
Troubleshooting en
57
Fault Cause and troubleshooting
lights up. 1. Open the door again.
2. Remove any trapped laundry.
3. Close the door.
4. Press Start/Reload to start the programme.
flashes. Door is not closed.
1. Close the door.
2. Press Start/Reload
to start the programme.
All other error codes. Malfunction
▶
Call the after-sales service.
→"Customer Service", Page66
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The programme does
not start.
You have not pressedStart/Reload .
▶
Press Start/Reload
.
Door is not closed.
1. Close the door.
2. Press Start/Reload
to start the programme.
Childproof lock is activated.
▶
→"Deactivating the childproof lock", Page42
-Finished In+ is activated.
▶
Check whether -Finished In+
is activated.
→"Buttons", Page24
Laundry is caught in the door.
1. Open the door again.
2. Remove any trapped laundry.
3. Close the door.
4. Press Start/Reload
to start the programme.
The door cannot
beopened.
is activated.
▶
Continue the programme by selecting
Spin or
Drain and pressing Start/Reload .
→"Resuming the programme when the programme
status is Rinse Hold", Page41
The temperature is too high.
▶
Wait until the temperature has dropped.
Loading ...
Loading ...
Loading ...