Loading ...
Loading ...
Loading ...
Shure Incorporated
16/39
2.
3.
•
•
The screen of the linked receiver will blink and display ID, while the status LED on the linked transmitter will flash red/
green.
To exit remote ID mode, momentarily press the link button or allow the function to timeout.
Multiple Receiver Systems
To run more than two receivers at the same time, the GLX-D+ frequency manager is recommended to improve RF reliability
(only compatible with GLXD4R+).
However, you can run multiple receivers without the frequency manager. Select the group by determining the total number of
receivers in your system. All receivers in the system must be set to the same group.
2.4 GHz and 5.8 GHz bands:
Group Number of Receivers Description
1 2 - 5 typical Default setting
2 2 - 5 typical Best multi-channel group if you experience interference
3 1 Best single-channel group if you experience interference
A*
Up to 11 typical, 16 maxi
mum
Default setting
B* Best multi-channel group if you experience interference
2.4 GHz bands only:
Group Number of Receivers Description
1 2 - 4 typical Default setting
2 2 - 4 typical Best multi-channel group if you experience interference
3 2 - 4 typical, 8 maximum
Only use Group 3 in controlled WiFi environments because there are no back
up frequencies to avoid interference
4 1 Best single-channel group if you experience interference
A*
Up to 9 typical, 11 maxi
mum
Default setting
B* Best multi-channel group if you experience interference
*Groups A and B are only for systems with a GLXD4R+ and GLXD+ frequency manager.
See Tips to Improve Wireless System Performance for additional information. See the GLXD+FM user guide for information
about receiver groups when connected to the GLX-D+ frequency manager.
Receiver Band Modes
There are 3 band modes available for GLXD+ receivers. The band mode options are:
2.4 GHz-only mode
5.8 GHz-only mode
Loading ...
Loading ...
Loading ...