Loading ...
Loading ...
Loading ...
5
Fig. 2
Fig. 1
Fig. 3
INSTRUCTIONS FOR USE
To reduce the risk of electric shock, this appliance is equipped with
a polarized plug (one blade wider than the other). This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change the plug in
any way.
1. Plug into a 120-volt outlet.
2. It is highly recommended that the foot massager be used with
socked feet. Do not use the unit with shoes.
3. Place massager on the floor in front of your chair or seat.
4. To activate massage action, press the power p button
once (Fig. 1).
5. To activate soothing heat with massage, press the power p
button a second time. The heat nodes will glow red (Fig. 2). Allow
a few moments for the heating action to warm up.
6. For additional relaxing massage, rub feet back and forth over
both the rolling arch massage and the stationary raised massage
nodes in the center of the unit (Fig. 3).
7. When finished, turn the unit off and unplug. Off is reached by
pressing the power p button until the unit turns off. (The first
press of the power p button turns on the massage function; the
second press turns on the soothing heat function, and the third
press turns the unit off.)
NOTE: As a safety feature, the soothing heat function cannot
be used alone.
Loading ...
Loading ...
Loading ...