Loading ...
Loading ...
Loading ...
11
CARE AND MAINTENANCE
CLEANING YOUR APPLIANCE
IMPORTANT: Always unplug the unit before cleaning or performing maintenance. Never use harsh
cleansers or scouring pads to clean any part of the unit.
Turn off the power, unplug the appliance, and remove all items including shelves.
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth before cleaning control panels or any electrical
parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
Do not connect or disconnect the electric plug when your hands are wet.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion.
Do not use solvent-base cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is off for an extended
period of time, proper steps should be taken to protect your contents.
INACTIVITY
If the unit will not be used for a period of less than three weeks, leave the cooler operating. If the
period of inactivity is several months, remove all items and turn the unit off. Clean and dry the interior
thoroughly. Leave the door open slightly to prevent any possible moisture build-up.
MOVING YOUR APPLIANCE
Before moving your cooler, first be sure to remove all items from the cooler.
Use two or more people to move and install the appliance. Failure to do so can result in back or
other injuries.
Securely tape down any loose items, such as shelves, inside the unit.
Turn the adjustable leg up to the base to avoid damage.
Tape the door shut.
Ensure that the unit stays securely in the upright position during transportation. Protect the
outside of the appliance with a blanket or similar item.
1
W W W . V I N O T E M P . C O M
12
If the unit is unplugged, loses power,or is turned off you must wait 3 to 5 minutes
before restarting. Attempting to restart the wine cooler before this time has elapsed
may prevent the wine cooler from starting.
Loading ...
Loading ...
Loading ...