Loading ...
Loading ...
Loading ...
6
ENG
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the Induction hob. When an excessive
temperature is monitored, the Induction hob will stop operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g. aluminium), or some other small item (e.g. knife, fork, key) has
been left on the hob, the hob automatically go on to standby in 1 minute. The fan will keep cooking down the
induction hob for a further 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function for your induction hob. It shut down automatically if ever you forget
to turn off your cooking. The default working times for various power levels are shown in the below table:
Power level 1~3 4~6 7~8 9
Default working timer (min) 360 180 120 90
When the pot is removed, the induction hob can stop heating immediately and the hob automatically switch off after
2 minute.
People with a heart pace maker should consult with their doctor before using this unit.
SPECIAL FUNCTIONS
USING YOUR INDUCTION HOB
To start cooking
1. Touch the ON/OFF key (C) for 3 seconds. After power on, the buzzer beeps
once, all displays show" - ", indicating that the induction hob has entered the state
of standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. According to the heating zone where the pan is placed, select a relevant zone select key by pressing key (A).
The symbol 0. Selected will stay fully it.
4. Adjust heat setting by touching the slider regulating key (D) control.
• If you don’t choose a heat setting within 1 minute, the induction hob will automatically switch off. You will
need to start again at step 1.
• You can modify the heat setting at any time during cooking.
Power down Power up
Loading ...
Loading ...
Loading ...