Frigidaire PLWC486GS0 Official Wine Cooler

User Manual - Page 5

For PLWC486GS0.

PDF File Manual, 9 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Engagedwineracks
Therearefive,fulldepth
wineracksontheupperpart
ofthecabinettostore
winebottIes.
Thesecondsupporting
guido(countingfrom
top-down,see
illustrationmarked"A')
isnotsuitabmeforwine
racks.Allofthetopfive
winerackshavetabsto
engage the cabinet on both
sides. Any of the wine racks
can be removed to store
larger bottles.
To remove a rack:
1. Remove all bottles from rack.
2. Lift rack upwards and then pull out.
To replace a rack: place sides of rack back onto supporting
guides in cabinet and push racks all the way into place.
Bottle arrangement
The top five racks each hold
eight bottles with the necks
alternating front to back.
The bottom rack consists of two
stories, each of which holds
six bottles with the necks
facing the front.
Interior Light
The appliance has an interior
light (max. 15W) for easy
interior visibility.
WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS
WITH NO EFFECT ON THE OPERATION OFTHE APPLIANCE.
RED WHITE
15W
MAX
COOL DOWN PERIOD
The intended temperature range of the wine cooler is 39°F to
64°F (+/- 5°F ).
Average temperature for red wine is 54°F to 61°R
Average temperature for white wine is 43°F to 50°R
The display usually shows the average temperature of the
appliance at that moment.
PRESETWINE ZONES:
Press the [Red] or [White] pads to choose preset storage
conditions for Red or White Wine. (The indicator 'RED' or
'WHITE' will light accordingly.) The programmed temperature
for red or white wine will be displayed for a few seconds.
MANUAL TEMPERATURE SETTING:
The temperature of the wine cooler can be set anywhere
between 39°F to 64°F by the temperature up =& and
temperature down _" pads as follows:
(1) Press the [SET] pad until you hear a "beep" sound
(approximately two seconds).
(2) Press the "_-_'_ pads to increase or decrease the desired
temperature in increments of one degree.
(3) Press the [SET] pad to confirm your choice - if no pad is
pressed within ten seconds your choice will be
automatically confirmed.
The ,_ indicator indicates status of the
refrigeration cycle as
follows:
(1) It remains ON during the refrigeration cycle;
(2) It remains OFF during the idle cycle.
To switch the interior light on/off, simply press the [Light] pad.
To switch the Appliance on/off, simply press and hold [White]
pad for approximately two seconds.
Loading ...
Loading ...
Loading ...