Loading ...
Loading ...
Loading ...
Getting Ready
EN-31
1.
Attach side panels and to crosspiece .
Secure the side panels using four
screws.
• When installing parts , slide the brackets into the
slots in either end of crosspiece . If the brackets
are not inserted into the ends of the crosspiece
as
far as they will go, the screws
will not be able to
enter into the screw holes of the brackets , which
can strip the threads of the screws.
• Cover the screw heads with the caps .
2.
Use the two screws
to secure the top left
and right edges of the back panel
to the
brackets
of side panels
and
.
IMPORTANT!
• Make sure that the back panel
is positioned
correctly as described below when installing it.
– Before sliding back panel
into place, make sure
that the widely spaced screw holes along the
bottom of the panel are on the left (when viewed
from the front of the stand), and the narrowly
spaced holes are on the right.
• At location
, slip the clip
onto to the screw
before installing the screw.
3.
Next, secure the bottom of the back panel
with the six screws
.
4.
Adjust the height adjustment screw
to
provide support so crosspiece
does not
bow downwards when the pedals are
pressed.
IMPORTANT!
• Pressing the pedals without adjusting height
adjustment screw
can result in damage to
crosspiece
. Always make sure you adjust height
adjustment screw
before operating the pedals.
A
E
E
D
B
I
I
2
1
C
Wide
Narrow
3
G
G
4
J
C
F
A
B
5
D
Loading ...
Loading ...
Loading ...