Loading ...
Loading ...
Loading ...
8 | nuwavenow.com
OPERATING THE OXYPURE
CLEAN AIR AT THE TOUCH OF A BUTTON
1. Plug the Power Supply cord into the
jack at the back of the OxyPure, and
then plug it into a suitable electrical
outlet. The unit will beep once.
2. Press the Power icon. The unit will
activate at the lowest fan speed. It will
beep once and the upper-right LED will
light.
3. Press the Power icon again to increase
the fan speed to medium. The unit will
beep and the second LED will light.
4. Press the Power icon again to increase
the fan speed to high. The unit will beep
and the third LED will light.
5. Press the Power icon a fourth time and
the OxyPure will turn off. The unit will
beep and the LEDs will go dark.
Number of Presses Fan Speed Level Bars on Panel Fan Speed (RPM)
1 1 1 400
2 2 2 800
3 3 3 2450
4 OFF 0 OFF
One Button Does it All
Simplicity. That is the secret of the OxyPure HEPA 300 Air Purier. With only one button, it
is simple to operate. With its revolutionary HEPA/Carbon lter, it is as easy to relax knowing
that your air is as clean as the unit is simple to maintain. With its lightweight design and
construction, it is easy to take almost anywhere. Simplicity and peace of mind at the touch
of a button.
EnergySTAR Certication
The U.S. Environmental Protection Agency
(EPA) has published specications for
energy efciency using a Clean Air Delivery
Rate (CADR) to Watt ratio. The unit being
tested must produce a CADR of at least
50 for smoke. Minimum performance is 2.0
CADR/Watt with 2.0 Watts standby power.
The OxyPure passed the test handily.
Criteria Standard Measured
Smoke CADR (ft³/min.) >50 84
Total Energy Conumed (Watts) -- 13.3
Smoke CADR/Watt (ft³/min./W) >2.9 6.3
Standby Power (Watts) <1 0.55
Electrical Safety
Along with energy efciency comes safety.
The California Air Resources Board (CARB)
ensures that every air purier sold in
California meets certain standards for
electrical safety and performance.
The OxyPure was tested for electrical safety
against the ANSI/UL507 electrical safety
standard, and was found to be fully
compliant.
Test Standard Measured
Electrical Safety ANSI/UL507 Compliant
Low Speed
Fan Speed 1 Fan Speed 2 Fan Speed 3
Medium Speed
High Speed
Loading ...
Loading ...
Loading ...