Tripp Lite NGS8C2POE Owner's Manual

Loading ...

Conﬁguration

Accessing the Management Conﬁguration Interface

After powering the switch for the ﬁrst time, the Network Gigabit Smart Switch can be

conﬁgured using a Web browser. To access the switch, the management computer and the

switch must be set to the same subnet. The IP address of the management computer must

be conﬁgured manually. The switch’s default IP address is 192.168.2.1 and the default

subnet mask is 255.255.255.0. The default username and password are case-sensitive.

The default username is admin and the default password is admin.

The Network Gigabit Smart Switch contains software for viewing, monitoring and

management. This management software is not required for the switch to function. The

ports can be used without the management software. However, the management software

enables setup of VLAN, Trunking and other additional features. The use of these features

can improve the efﬁciency of the switch, which will result in improved overall performance

for both the hardware and the network.

For more information about conﬁguring the switch, visit www.tripplite.com and access the

NGS-Series Network Gigabit Smart Switch Web Conﬁguration Guide.

17-04-027-93368F.indb 7 4/5/2017 3:47:20 PM

Loading ...

Tripp Lite NGS8C2POE 8 10/100/1000Mbps Port Gigabit L2 Web-Smart Managed PoE+ Switch, 140W