Loading ...
Loading ...
Loading ...
435 II 435e II
Cylinder displacement, cu.in/cm
3
2.49/40.9 2.49/40.9
Idle speed, rpm 2900 2900
Maximum engine power acc. to ISO
7293, kW/hp @ rpm
1.6/2.2@9000 1.8/2.4@9000
Ignition system
4
Spark plug NGK BPMR 7A/ Champion RCJ 7Y/
Husqvarna HQT-1R
NGK BPMR 7A/ Champion RCJ 7Y/
Husqvarna HQT-1R
Electrode gap, inch/mm 0.02/0.5 0.02/0.5
Fuel and lubrication system
Fuel tank capacity, US pint/l 0.78/0.37 0.78/0.37
Oil tank capacity, US pint/l 0.53/0.25 0.53/0.25
Type of oil pump Automatic Automatic
Weight
Weight, lb/kg 9.7/4.4 9.7/4.4
Saw chain/guide bar
Recommended bar lengths
5
, inch/cm 13-18/33-45 13-18/33-45
Pitch, inch/mm 0.325/8.25 0.325/8.25
Thickness of drive links, inch/mm 0.050/1.3 0.050/1.3
Type of drive sprocket/number of
teeth
Spur/7 Spur/7
Saw chain speed at 133% of maxi-
mum engine power speed, ft/s / m/s
75.5/23.1 75.5/23.1
Accessories
Recommended cutting equipment
Chainsaw models Husqvarna 435 II, 435e II, 440 II,
440e II have been evaluated for safety according to
EN ISO 11681-1:2011 (Machinery for forestry - Portable
chainsaw safety requirements and testing) and fulfill the
safety requirements when equipped with the below listed
guide bar and saw chain combinations.
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2021.
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is specified by
the number of teeth, such as 10T. For solid guide bars
the nose radius is specified by the dimension of the
nose radius. For a given guide bar length, you can use a
guide bar with smaller nose radius than given.
4
This spark ignition system complies with the Canadian ICES-002 standard.
5
The nominal guide bar size is not necessarily the same as the cutting length.
1270 - 010 - 25.09.2023 35
Loading ...
Loading ...
Loading ...