Loading ...
Loading ...
Loading ...
• Assemble the front ends of the hitch mount arms
together using two 5/16" x 1-1/4" hex bolts and 5/16"
nylock nuts. Do not tighten yet. See figure 3.
• Assemble the hitch brackets to the top and bottom of
the hitch mount arms using two 5/16" x 2" hex bolts
and 5/16" nylock nuts. Do not tighten yet. See figure
3.
• Assemble the 3/8" hitch pin through the hitch brackets
and secure it with a 1/8" hair cotter pin. See figure 3.
_/16" NYLOCK NUT
1/8" HAIR
COTTER PIN
5/16" x 1-1/4"
HEX BOLT
HITCH
BRACKET
5116" x 2"
HEX BOLT
"_--_ 318" HITCH PIN
FIGURE 3
• Tighten the bolts and nuts assembled in figure 3.
Tighten the bolts and nuts assembled in figure 1.
Tighten the rear bolts and nuts assembled in figure 2.
Assemble the axle bracket to the outside of the rear
angle brackets using two 5/16" x 1" hex bolts and
5/16" nylock nuts. The angled ends of the axle bracket
must point as shown in figure 4. Tighten the bolts and
nuts and then loosen slightly.
AXLE BRACKET
5/16" NYLOCK NUT
5/16" x 1"
HEX BOLT
FIGURE 4
Assemble the wheels to the axle bracket using two
shoulder bolts and two 3/8" nylock nuts. Tighten. See
figure 5.
SHOULDER BOLT
3/8" NYLOCK NUT
FIGURE 5
• Assemble a hitch arm mount bracket to the axle
bracket using two 5/16" x 1" carriage bolts and 5/16"
nylock nuts. Do not tighten yet. See figure 6.
• Insert the lift handle down through the tine shield.
Attach it to the just assembled hitch arm mount
bracket using a 5/16" x 1" hex bolt and a 5/16" nylock
nut. Tighten. See figure 6.
• Position the hitch arm mount bracket so that there is
side tension on the lift handle when it is locked in the
up position. Tighten the nuts. See figure 6.
• Assemble the grip onto the end of the lift handle. See
figure 6.
GRIP
LIFT HANDLE
5/16" x 1"
CARRIAGE BOLT
5/16" x 1"
HEX BOLT
5/16" NYLOCK
NUT
5/16"
NYLOCK
NUT
FIGURE 6
Loading ...
Loading ...
Loading ...