Please register this product at
www.conair.com/registration
©2018 Conair Corporation
Service Center
Conair Corporation
Service Department
7475 North Glen Harbor Blvd.
Glendale, AZ 85307
18PG050897
IB-15526
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.
MODEL LT85
all-in-one facial trim system
SATINY SMOOTH
®
F
o
r
y
o
u
r
s
a
f
e
t
y
a
n
d
c
o
n
t
i
n
u
e
d
e
n
j
o
y
m
e
n
t
o
f
t
h
i
s
p
r
o
d
u
c
t
,
USING THE EYEBROW TRIMMER
1. This trimmer comes with two trimming blades.
The larger blade can be used to trim body hair
and eyebrows. The smaller blade is ideal for
detailing. It also comes with a comb attachment
that helps you achieve an even cut when you
do not want to completely remove the hair. The
comb attachment has two sides: The long tooth is
for body hair, and the short tooth is for eyebrow
trimming.
2. Aligning the indicator with the 6mm mark on
the comb leaves hair longer, while aligning with
the 3mm mark leaves hair shorter (see FIG. 6).
3. To use the comb attachment, be sure the unit
is in the OFF position and slide the comb over the
trimming blades (see FIG. 7). Make sure that the
teeth of the comb are facing in the same direction
as the trimming blade, and that the top of the
comb is even with the top of the trimmer. If you
want to completely remove hair, use the trimmer
without the comb attachment.
4. To operate the trimmer, turn the battery cover
to right making the arrow toward the “I” mark.
When you are finished trimming, turn the battery
cover to left making the arrow towards to “O”
mark, the unit is turn off.
5. To store the trimmer, slide the comb attachment
cover over the trimming blades.
TAKING CARE
OF YOUR TRIMMER
BLADE CARE
Because the trimmer blades are precision made
for a very special use, they should always be
handled with care. Each time you finish using
the trimmer, take the cleaning brush provided and
brush away any loose hair that has collected in the
blades, then rinse blades under water only, allow
to air-dry and store the trimmer until the next use.
To promote the long life of the appliance, use
your trimmer only for the purpose intended by
the manufacturer.
CAUTION
1. When shaking off excess water, hold the
main unit firmly to prevent releasing the head
assembly or dropping the unit.
2. Do not use a dryer or heater to dry the
trimmer. This may result in malfunction or
damage to the trimmer.
LIMITED TWO-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free
of charge for 24 months from the date of purchase if
the appliance is defective in workmanship or materials.
To obtain service under this warranty, return the defective
product to the service center listed on back, together
with your purchase receipt and $5.00 for postage and
handling. California residents need only provide proof of
purchase and should call 1-800-3-CONAIR for shipping
instructions. In the absence of a purchase receipt, the
warranty period shall be 24 months from the date of
manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR
LIABILITIES, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE SHALL BE
LIMITED IN DURATION TO THE 24-MONTH DURATION
OF THIS WRITTEN, LIMITED WARRANTY.
Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may
not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of
special, incidental, or consequential damages, so the
above limitation may not apply to you.
This warranty gives you specific legal rights, and you
may also have other rights, which vary from state
to state.
USING THE BIKINI TRIMMER
1. Start with the guide comb attached for first
time use.
2. Turn the unit on.
3. To fully remove hair or to outline the bikini
area, use the trimmer without the attachment
comb.
4. When removing hair, gently move the blades
against the direction of growth.
5. To outline, place the blades perpendicular to
the skin surface and apply the blades to the edge
of the hair. Use the blades to create the desired
outline.
6. For the cleanest finish, follow up with the foil
shaver.
7. For cutting hair without completely removing
it, attach the detail comb to the head. Place the
comb on the cutting blades first, align the comb
ribs with top surface of trimmer head housing and
then snap down onto the back of the trimming
head (see FIG. 4).
8. Snap off the comb guide to release from the
trimmer head (see FIG. 5).
FIG. 4
FIG. 5
FIG. 6
FIG. 7
lt85_18pg050897_ib_comp.indd 2 1/18/18 12:42 PM
Loading ...
Loading ...
Loading ...
