Loading ...
Loading ...
Loading ...
DSO3000 SERIES
DIGITAL OSCILLOSCOPE
General Safety Summary
Review the following safety precautions carefully before operate the device to avoid any
personal injuries or damages to the device and any products connected to it.
To avoid potential hazards use the device as specied by this user’s guide only.
■ To Avoid Fire or Personal Injury
■ Use Proper Power Cord. Use only the power cord specied for this product and
certied for the country of use.
■ Connect and Disconnect Properly. Do not connect or disconnect probes or test
leads while they are connected to a voltage source.
■ Connect and Disconnect Properly. Connect the probe output to the measurement
device before connecting the probe to the circuit under test. Disconnect the probe
input and the probe reference lead from the circuit under test before disconnecting
the probe from the measurement device.
■ Observe All Terminal Ratings. To avoid re or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings informa
tion before making connections to the product.
■ Use Proper Probe. To avoid shock hazard, use a properly rated probe for your meas
urement.
■ Avoid Circuit or Wire Exposure. Do not touch exposed connections and compo
nents when power is on.
■ Do Not Operate With Suspected Failures. If suspected damage occurs with the
device, have it inspected by qualied service personnel before further operations.
■ Provide Proper Ventilation. Refer to the installation instructions for proper ventilation
of the device.
■ Do not operate in Wet/Damp Conditions.
■ Do not operate in an Explosive Atmosphere.
■ Keep Product Surfaces Clean and Dry.
Loading ...
Loading ...
Loading ...