Loading ...
Loading ...
Loading ...
Help Guide
Wireless Speaker
SRS-XE200
Listening to music of a device via BLUETOOTH connection
You can enjoy listening to music of a BLUETOOTH device and operate it by the speaker via BLUETOOTH connection if
it supports the following BLUETOOTH profiles.
A2DP (Advanced Audio Distribution Profile)
Enables you to enjoy high-quality audio contents wirelessly.
AVRCP (Audio Video Remote Control Profile)
Enables you to adjust the volume and operate to play, pause or skip to the beginning of the next/current track.
Operations may vary depending on the BLUETOOTH device. Refer also to the operating instructions supplied with the
BLUETOOTH device.
Note
Make sure beforehand that the volume on the BLUETOOTH device and speaker are set to a moderate level to avoid sudden loud
sound output from the speaker.
Depending on the BLUETOOTH device, adjusting the volume of the speaker may not be possible on the BLUETOOTH device
while playback on the device is stopped/paused.
Connect the speaker with the BLUETOOTH device.
When the BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
speaker and the activity of the
(BLUETOOTH) indicator changes from flashing to lit.
1
Start playback on the BLUETOOTH device.
At the time of purchase, the audio output of the speaker is set for monaural audio playback.
You can switch the audio output setting of the speaker between monaural and stereo with “Sony | Music Center.”
2
Adjust the volume by pressing the +/- (volume) buttons on the speaker or operating the BLUETOOTH
device.
When you press the +/- (volume) buttons on the speaker or adjust the volume on the BLUETOOTH device, the
(power) indicator flashes once or 3 times.
Depending on the BLUETOOTH device you are using, the
(power) indicator on the speaker may not flash even if
you adjust the volume on the BLUETOOTH device.
Press and hold the +/- (volume) buttons for rapid adjustments.
3
39
Loading ...
Loading ...
Loading ...