Loading ...
Loading ...
Loading ...
6
3. MAINTENANCE
VD0210
1) ERV or HRV core 2) Core filters
1
2
Refer to illustration at right to identify the inner parts of
your unit.
Risk of electric shock. Before performing any maintenance or servicing,
always disconnect the unit from its power source. When cleaning the unit,
it is recommended to wear safety glasses and gloves.
WARNING
!
3.1 QUARTERLY MAINTENANCE
1. Turn the unit off and unplug the unit.
2. Remove the unit door by
following these steps:
A Remove both door
lower mechanical
screws 8-32 x 1 (1 ) and set
aside.
B Open (2) and lift out the
door (3).
3. Slide out both filters from the top of the recovery core.
4. Wash both core filters under lukewarm water with mild soap. Rinse thoroughly and let
dry completely before reinstalling on the core.
5. Slide the cleaned filters into the unit.
NOTE: The mesh side of filters must be on bottom (rests on core surface).
6. Reinstall the door. Secure it with both mechanical screws 8-32 x 1” previously removed,
plug back the unit and turn it on.
NOTE: The unit will return to its previous setting after a 30-second delay for
booting sequence.
VO0149
A
B
1
3
2
3.2 ANNUAL MAINTENANCE
Perform steps 1 and 2 of the Quarterly Maintenance (Section 3.1), then continue with the
following steps on next page.
Loading ...
Loading ...
Loading ...