Loading ...
Loading ...
Loading ...
EN
6-Daily use
17
6.12 After washing
1. At programme cycle end
is displayed.
2.
3. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.
4.
5.
6. Open the door to prevent formation of moisture and odours. Let it open while not used.
The acoustic signal can be deselected if necessary:
1. Switch on the appliance.
2. Select the SPIN programme.
3. Press the “Steam“ button and “Extra rinse” button at the same time for about 3
seconds. “
” will be displayed and the buzzer will be deactivated.
For activating the buzzer press these two buttons at the same time again. “
” will
be displayed.
6.11 Interrupt / cancel wash programme
To interrupt a running programme press gently “Start/Pause“. The LED above the button
To cancel a running programme and all its individual settings:
1. Press “Start/Pause” button to interrupt the running programme.
2.
3.
Note: Door lock
For safety reasons the door is locked partially during the washing cycle. It is only pos-
sible to open the door at the end of the programme or after the programme was can-
celled correctly (see description above).
In case of high water level, high water temperature and during spinning it is not pos-
sible to open the door; is displayed
The switched on appliance will go into standby mode if it will not be activated within 2
minutes before starting the program or at the end of programme. The display switches
Press “Start/Pause“ button (Fig. 6-8) to start. The
lights up continuously.
Appliance operates according to present settings.
Changes are only possible by cancelling the pro-
gramme.
6-8
Press “On/Off” button to turn on the appliance,select programme
Spin and then se-
3.
lect
"no Speed"(speed lights are off) ,start the machine to drain the
water.
4.
After closing the programme to restart the appliance,select a new programme and start it.
Loading ...
Loading ...
Loading ...