Loading ...
Loading ...
Loading ...
3-Control panel
EN
10
When the function is activated the temperature of the programme cannot be changed.
If “Temp.” button is pushed the “Steam” function will be deactivated. You can activate
“Steam” function only before to start any programme. You cannot activate “Steam” func-
tion while the appliance is already executing a programme.
.
3.5.4 Function button“Extra rinse“
Press this button (Fig. 3-10) to rinse the laundry more
intense with fresh water. This is recommended for
people with sensitive skin.
By pressing the button several times one to three ad-
ditional cycles can be selected. They appear in the dis-
play with P--1 /P--2 /P--3 .
3.7 “Start/Pause“ button
Press this button (Fig. 3-12) gently to start or inter-
rupt the currently displayed programme. During pro-
gramme setting and during programme run the LED
above the button is shining, or if interrupted blinking.
3.6 “Delay” button
Press this button (Fig. 3-11) to start the programme
with a delay. End time delay could be increased in steps
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
3.8 Child lock
Press button “Temp.“ and ”Speed” (Fig. 3-13) for 3
seconds simultaneously to block all panel elements
against activation.
For unlocking please press again
the two buttons.
The display shows (Fig. 3-14) if a button will be
pressed, when the child lock is activated. The change
is not running.
3-14
Start/Pause
Press “Start/Pause”but-
ton to activate the time delay.It is not applicable to pr-
ogramme SPIN.
3-11
3-10
Start/Pause
3-12
3-13
Loading ...
Loading ...
Loading ...