Loading ...
Loading ...
Loading ...
9
Overload protector
repeatedly cuts off
power
1 .voltage is too low,
2 .ventilation is bad, the
temperature is too high,
3. three-phase motor
inversion, motor temperature
is high
1 .Check the voltage,
not less than 10% of
the rated voltage
2. Put the air
compressor in a well-
ventilated place
3. check and exclude
The pressure of the
air compressor
drops after
shutdown
1. The air channel connection
is loose and leaks.
2 .The drainage valve is open.
3 .The check valve leaks
1. Check and remove
the drainage valve.
2. Tighten the
drainage valve.
3 .Remove and clean
the drainage valve
The discharged gas
contains a lot of
water
1. There is a large amount of
water in the gas storage tank.
2. The humidity is too high
1. Drain the water in
the gas storage tank
2. Move the air
compressor to a place
with low temperature
for use, or use an oil-
water separator
The air compressor
keeps running
1. Air pressure switch is
damaged
2. There is leakage
1. Replace the air
pressure switch.
2. Check and remove
The air compressor
vibrates
1. Fastener loose
2. valve plate damaged
3.support pad damaged or
lost
4. motor out of phase
1. Check and remove.
2. Check and replace.
3.Replace the foot
pad.
4 .Check and remove
The air compressor
is slow or can not
reach the specified
pressure
1. The drainage valve is open,
2. Air filter is blocked,
3. Pipeline air leakage,
4. Valve plate poor action or
foreign matter or air leakage,
5. Piston ring with the cylinder
excessive wear
1. Tighten the
drainage valve
2. Clean or replace the
filter element
3. Check and remove
the filter.
4.Clean or replace the
filter.
5. Replace the new
product
High operating
frequency of air
compressor
1. Pipeline leaks
2. The gas consumption of the
gas equipment is greater than
the gas production of the air
compressor.
3. The sewage in the gas
storage tank is not discharged
1. Check and exclude.
2. Replace other
models of air
compressors.
3. Exhaust the water in
the air storage tank
Loading ...
Loading ...
Loading ...