Loading ...
Loading ...
Loading ...
EN - 13
3.5. 4-Wire Power Supply Cord Connection
WARNING
•Before the connection, disconnect the power.
•Use UL listed 240V / 30A power supply cord.
Your dryer was equipped with strain relief. Use this strain relief in connection.
1. Remove the screw and terminal box cover.
2. Remove the clamp of the strain relief which has already attached on your machine.
Then pass the clamp through the supply cord and put the supply cord through the main
body of the strain relief. Be sure that wire insulation of the cord inside the strain relief.
3. Remove the terminal block screws which are indicated by A and grounding screw
which is indicated by B. Nuetral ground conductor (central terminal) is provided in the dryer
as a closed loop.
Loading ...
Loading ...
Loading ...