Loading ...
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DML805
LED 20 pcs, 10 W
Operating time*
(with Battery BL1830) (Approximately) High: 5 hours / Low: 10 hours
Power source 100-240 V 50-60 Hz AC
or 14.4 V / 18 V DC
Standard battery cartridge BL1415 / BL1415N BL1430 / BL1440 /
BL1450
BL1815 / BL1815N /
BL1820
BL1830 / BL1840 /
BL1850
Voltage (with battery operation) 14.4 V 18 V
Dimensions (L x W x H) 8-3/8" x 10-1/4" x 12-7/8" (214 mm x 261 mm x 328 mm)
Net weight 5.1 lbs (2.3 kg) 5.5 lbs (2.5 kg) 5.2 lbs (2.4 kg) 5.8 lbs (2.6 kg)
Pressure receiving area (Lens area) 0.0195 m2
• Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
* This value is only advisory. This may vary according to the condition and environment of the battery.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
• Read instruction manual.
• Indoor use only
Cd
Ni-MH
Li-ion
• Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their
implementation in accordance with national
laws, electric equipment and batteries and
battery pack(s) that have reached the end
of their life must be collected separately and
returned to an environmentally compatible
recycling facility.
• DOUBLE INSULATION
• Optical Radiation (UV and IR).
Minimize exposure to eyes or skin.
• Do not stare at operating lamp.
• Use appropriate shielding or eyes
protection.
• Take particular care and attention!
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: When using electric tools, basic safety
precautions should always be followed to reduce the risk
of re, electric shock, and personal injury, including the
following:
READ ALL INSTRUCTIONS.
CAUTION:
1. When the tool is not in use, always switch off, and
unplug / remove the battery cartridge from the tool.
2. Do not cover or clog the lit tool with cloth or carton,
etc. Covering or clogging it may cause a ame.
3. Do not use the tool in damp or wet locations. Do not
expose the tool to rain or snow. Do not wash it in
water.
4. Do not use the tool in explosive atmospheres, such
as in the presence of ammable liquids, gases or
dust.
5. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied
plugs and matching outlets will reduce risk of electric
shock.
6. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Loading ...
Loading ...
Loading ...