Loading ...
Loading ...
Loading ...
There are abnormal sounds
during cleaning
Foreign matter wound on the
main brush/side brush or the
main wheel
Please turn off the machine
for cleanup
Regular cleaning does not
work
Low battery
Regular cleaning can only be
started when the remaining
battery level is greater than
30%. Please keep the
machine charged every day
Cannot be connected to APP
Abnormal Wi-Fi network,
wrong Wi-Fi password or
abnormal APP
1. Please ensure that the
machine is in a good Wi-Fi
signal area
2. Re-enter the Wi-Fi
password or reset Wi-Fi
download and connect the
latest version of APP
The floor mopping module
outputs no water or little
water
No enough water in the
water tank, too dirty mop
cloth or the mop cloth
support not installed in place
1. Please check whether
there is water in the water
tank
2. Dean the mop cloth
3. And install the mop cloth
correctly according to the
instructions
The floor mopping module
outputs too much water
The water tank cover is not
in place, and the water
output is adjusted to the
maximum
Please confirm that the water
tank cover is installed in
place, and adjust the
appropriate amount of water
in the APP
The dust collection perfor-
mance degrades
Dust accumulates in the dust
bag, causing the air flow into
the suction nozzle to
decrease
Replace the dust bag
Cannot return to the dust
collection charging pile after
fixed-point cleaning or
moving
The robot constructs a new
map or the distance is too far
After fixed-point cleaning or
moving for a long distance,
the robot will generate a new
map. If the dust collection
charging pile is far away, the
robot may not be able to
recharge automatically.
Please manually put the
machine back to the dust
collection charging pile for
charging
16
EN
If you have any questions, please email to support09@laresar.us
Loading ...
Loading ...
Loading ...