Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE _._. _._/'_ _, f
Check Brake C_oeraitoft
v"
Tire Pressure
Check Operator Presence and
T InterlockSystems
R Check for Loose Fasteners
A Sharpen/Replace Mower Blades
T LubricationChart
0 Check Battery Level
R Clean Battery and Termlnads
Check;Transaxle Cooitng
Check V-Belts
Check Engine OII Level
Change Engine OII (with ollfilter)
E Change Engine 011(withoutoll filter)
N Claan/=JrFilter
G Clean Air Screen
IN Inspect Muffler/Spark
Arrester
E ReplaCe OII Filter (If equipped)
Clean Engine COOlingFins
Replace Spark Plug
Replace Air Filter Paper Cartridge
I Replace Fuel Rlter
v'
'/ !v'
v0 v'
V' _.,
v'
1 - Change more often when operating under a heavy Ioed or
In high ambient temperatures.
2 - Sen,tce mo_eoften when opefaitng In dfrty ordusty condit_cns.
3 - Replace blades more otten when mowing In sandy so_.
4 - Not required it equipped _ maintemmce-free battJry.
5 - Tighten front axle pl'_t boltto 35 R.-Ibs. maximum.
Do notoverHghten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air tilter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
_)Tie Rod BallJoints
_) Spindle -_) Spindle
Zerk Zerk
Bearing
Zerk
(_Steedng _(
Sector f
Gear
Teeth
(_Checld
Add
Transaxle
Fluid
Wheel
_,Baadng Zerk
I'
® Engine
(_ SAE 30 or 10w30 motoroil
(_ General Purpose Grease
(_ Refer to Maintenance "ENGINE" Section
(_ Spray siliconelubriant(Move Bootsto
Lubdcate)
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
18sparingly.
Loading ...
Loading ...
Loading ...