Loading ...
Loading ...
Loading ...
7
ENG
Symbols Functions
NOTE
When the product operates for a certain time, the aluminum filters get dirty and the digital display shows “C” Clean
sign. This means the fil- ters should be cleaned. Press the speed reduction key for 5 secs in order to delete “C” sign
from the display.
Push Buton: Pressing the buttons will enable different functions. In order to disable them, press only the button Off.
Switches on and off the motor. (Except for
the lighting)
Increases the speed when the motor is
running.
Decreases the speed when the motor is
running.
If pressed this symbol, the motor turns
itself off 15 minutes later.
Display
Only switches on and off the lighting
system.
Stops the motor, except for the ligh Intense speed
Low speed It turns on and off the lighting system only.
Medium speed
Chimney hood is used in ducted and non-ducted kitchens.
In Ducted Use
In ducted use, extractor fan should be connected to an air outlet to send the air out. In order to use your chimney
hood efficiently, make sure length of the pipe system between the chimney hood and the air outlet should be
short. Your product has been manufactured suitable for ducted and non-ducted use.
Round Charcoal Filter
In kitchens with no duct, a round charcoal filter should be reintroduced the clean air into the kitchen. You can
obtain the round filter from your service or dealer.
Use Of Charcoal Filter
• Our products allow the installation of charcoal filter.
• Regardless of use of charcoal filters or not, grease filters should be installed on the product. Do not use your
product without grease filter.
• Use of charcoal filteris as follows.
OPERATING THE CHIMNEY HOOD
Loading ...
Loading ...
Loading ...