Loading ...
Loading ...
Loading ...
CLEANING THE HEADPHONES
Detach the washable headband and machine wash 30° C (Cold/Cool). Clean the
headphones with a soft, dry cloth. Note! Do not use liquids or sprays.
LED INDICATOR
Status Indicates
Red (continuous) Battery charging
White (continuous) Fully charged and connected to a USB power source
Blue (blinking) Pairing mode, waiting to pair
White (blinking) Waiting to connect
White (10s interval) Connected and switched on
Off Headphones are switched off or in normal operation
TROUBLE SHOOTING
Problem Action
Not powering on Charge the headphone using the USB cable.
Make sure the headphone is off before turning it on.
Not charging Make sure the USB power source is switched on.
The LED indicator is red while charging and white when fully charged.
Not pairing Move the devices closer to each other and away from any interference or obstruction.
Make sure the headphone is not connected to a different sound source when entering the pairing mode.
Disable and enable Bluetooth® communication on your sound source.
No sound Make sure the headphone is on and connected.
Make sure the sound source is playing.
Poor sound quality Move the devices closer to each other and away from any interference or obstruction.
IMPORTANT SAFETY INSTRUCTIONS
• Set your sound source to low volume before using the headphones.
• Do not use these headphones when operating a motor vehicle, a bicycle, or machinery or where your inability to hear outside
sounds may present a danger to you or others.
• Using these headphones limits your ability to hear noises around you, regardless of listening volume. Please use caution when using
these headphones.
PLATTAN ADV WIRELESS USER MANUAL ENG
FCC WARNING
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.This device complies with part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.Note: This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC WARNING
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil
ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
The device is compliance with RF field strength limits, users can obtain Canadian information on
RF exposure and compliance.
Le présent appareil est conforme de ce matériel aux conformités ou aux limites d’intensité de
Loading ...
Loading ...
Loading ...