Loading ...
Loading ...
Power button
Micro USB connector for charging the battery.
Zound Plug – Instant music sharing or wired connection to the
sound source
CONTROLS
PLATTAN ADV WIRELESS USER MANUAL ENGPLATTAN ADV WIRELESS USER MANUAL ENG
CHARGING
Plug the headphone into a USB power source using the micro USB cable. 2 hours charge gives approximately 8 hours of playback at
medium volume.
SWITCH ON
Press and hold the power button for 1 second
SWITCH OFF
Press and hold the power button for 2 seconds or leave the headphone inactive and disconnected for 10 minutes
CONNECTING TO A BLUETOOTH® ENABLED SOUND SOURCE
Follow the steps below when pairing the headphone with your sound source (smartphone, tablet or computer) for the first time.
Activate the Bluetooth® feature on your sound source, according to its user manual.
1. Set the headphone in pairing mode.
2. If the headphone is switched off: Press and hold the power button for 6 seconds.
• The ‘power on’ tone will sound after 1 second and when entering pairing mode, a second tone will sound.
• If the headphone is switched on: Double-click the power button.
Note: This method does not work if the headphone is already paired to another sound source.
The LED indicator blinks blue when in pairing mode.
3. Select and connect to Plattan_BT on your sound source, according to its user manual.
After the initial pairing, the two devices will auto-connect when they are switched on and within range of each other (10 meters).
PLAY/PAUSE/
ANSWER CALL
Single tap
PREVIOUS SONG
Swipe backward
NEXT SONG
Swipe forward
HANG UP/
REJECT CALL
Double tap
DECREASE
VOLUME
Swipe downward
or press and hold
the lower part.
INCREASE
VOLUME
Swipe upward or
press and hold the
upper part.
Loading ...
Loading ...
Loading ...