Loading ...
Loading ...
© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 3
Rev: V3
Date:062419
Advanced Amplier Interface
for Select Toyota Applications
AP4-TY13
Installation (cont.)
Speaker Connections to Aftermarket Amplier
The AP4-TY13 harness speaker wire outputs are able to be utilized for connecting the aftermarket amplier to the existing
speakers.
1. Using the wiring diagram and information below, cut the speaker wires that will be used between the AP4-TY13 30-pin
connector that plugs into the OEM amplier and the 30-pin connector that plugs back into the OEM harness.
2. Insulate the cut wires on the amplier side of harness.
3. Extend speaker wires from the aftermarket amplier outputs and connect them to the appropriate wires in the AP4-TY13
harness.
30-Pin AP4-TY13 Harness - Side that Connects to OEM Harness
8 Blue Subwoofer Speaker 2 Posive (SW2+)
23 Blue / Black Subwoofer Speaker 2 Negave (SW2-)
9 Green Le Rear Speaker Posive (LR+)
24 Green / Black Le Rear Speaker Negave (LR-)
10 Purple Right Rear Speaker Posive (LR+)
25 Purple / Black Right Rear Speaker Negave (LR-)
11 White Le Front Mid Posive (LF+)
26 White / Black Le Front Mid Negave (LF-)
12 Gray / Red Right Front Tweeter Posive (RFTW+)
27 Gray / Blue Right Front Tweeter Negave (RFTW-)
13 Brown / White Subwoofer Speaker 1 Posive (SW1+)
28 Brown / Black Subwoofer Speaker 1 Negave (SW1-)
14 White / Red Le Front Tweeter Posive (LFTW+)
29 White / Blue Le Front Tweeter Negave (LFTW-)
15 Gray Right Front Speaker Posive (RF+)
30 Gray / Black Right Front Speaker Negave (RF-)
Right Rear Speaker
Le Front Midrange
Right Front Tweeter
Subwoofer 1
Le Front Tweeter
Right Front Midrange
Pin Number Wire Color Wire Descripon Label
Subwoofer 2
Le Rear Speaker
Loading ...
Loading ...
Loading ...