Loading ...
Loading ...
Loading ...
5
User guide
Billi B-5000 – XL.
Options and Operation
To operate, simply press the left lever to
dispense boiling water and the right lever to
dispense chilled. When lifted the levers will
latch for continual delivery, until released with
a light press.
Operating modes can be selected by the user
by entering Options Mode.
Within the options mode, you can set the safety
switch through the hot water lever and power
save mode through the cold water lever.
—To enter the options mode:
1. Turn on the unit and wait for normal
operation (red & blue icons are both
illuminated constantly).
2. Push both the hot and cold levers down
& then while holding the two levers down
touch the safety switch indent at the back
of the black panel. Hold both levers and
safety switch for 3 seconds.
3. Icons will flash yellow.
4. Release both the levers & safety switch.
5. Unit is now in options mode.
6. If you wish to change or set the safety
switch mode, follow the safety switch
settings procedure below. If you wish
to change or activate the power saving
mode follow the power save mode
settings procedure below.
—Safety Switch settings
The Red padlock indicates the dierent
safety settings enabled. To change or activate
a setting once in options mode as above, press
and release the hot (left) lever to scroll through
the following options;
– Red Icon O: indicates the hot tap
is disabled.
– Padlock icon on, Red icon on: indicates
safety switch is enabled
– Red Icon On: indicates normal operation
with safety switch not enabled.
To save new setting and exit Options Mode,
touch the safety switch and release. Wait 10
seconds for unit to return to normal operation,
with the desired settings.
To dispense boiling water once the safety
switch is activated simply touch the indent
on the black panel, at the back of the tap.
You will be able to dispense boiling water for
8 seconds. After 8 seconds the safety switch
will automatically reactivate, and the red
padlock icon will appear again.
— Power save mode settings
(EcoIntelligence, standby or on 24/7)
The Green icons on the tap indicate the
power save level that is selected. To change
or activate a setting once in options mode
press and release the cold(right) lever to
scroll through the following options;
– Green Leaf icon: indicates Eco Intelligence™
self learning timer is enabled.
– Moon & Star Icon on: indicates Standby
Mode is enabled.
– Blue Icon On, no green icons: indicates
system is in 24 hour continuous mode
To save new setting and exit Options Mode,
press the safety switch and release. Wait 10
seconds for unit to return to normal operation,
with the desired settings.
—Holiday mode
To set press the pressure relief valve located
under the unit cover beside the filter housing.
Loading ...
Loading ...
Loading ...