Loading ...
Loading ...
Loading ...
User guide
Billi B-5000 – XL, XT, XR.
Features and Modes
—Dispenser Swivel
The B-5000 dispenser incorporates a swivel
function, allowing the dispenser to be swung
out of the way if more sink space is required.
A central position stop provides positive
location during normal usage.
—Safety Timeout
Your Billi B-5000 incorporates a water delivery
Safety Timeout to prevent an uncontrolled
flow of water. Water flow stops automatically
after a set time interval. Flow can be started
again by releasing and pressing the dispenser
lever or buttons.
Boiling water timeout – 10 secs;
Chilled water – 1 minute.
—Childproof safety switch
Your Billi B-5000 is fitted with a childproof
safety lock-out feature to protect against
accidental dispensing of boiling water and
the risk of burns. Please refer to safety
switch settings on page 5.
—Self learning timer (EcoIntelligence)
Your Billi B-5000 incorporates an energy
saving self learning timer. This timer
learns the users behaviour over a period
of time (up to one month) and pre-empts
the need for water throughout each 24-hour
period over a week. Data is lost when the
power is removed however learnings from
the first days use is applied to the entire
learning cycle so the unit will quickly
resume intelligent timer operation.
When the self-learning timer is enabled
the unit will enter standby if no water is
expected to be used for a 3 hour or more
period. The unit will shutdown completely
if no water is expected to be used for a 6
hour or more period. In oce environments
this feature will typically cause the unit to
turn o outside normal business hours,
ie: overnight and on weekends. In domestic
environments with no one home during
working hours the unit will turn o through
each weekday but may remain on at night
and during weekends. See page 6 for
dispenser icons. To activate, refer to
Options, page 5.
—Standby Mode
Standby operation may be optionally
enabled to reduce power consumption.
In standby mode the hot water set point is
reduced to 72°C and the cold water set point
is increased to 18°C. When enabled, standby
is invoked after two hours from the time of
last use. When a tap lever or button is
pressed in standby no water is dispensed.
The indicators will flash to indicate the
water is not ready. The lever or button can
be repressed to dispense water. During
Standby mode the moon & star icon will flash.
See page 6 for dispenser icons. To activate,
refer to Options, page 5.
—Boiling water disabled mode
Your Billi B-5000 features an additional
boiling water safety isolation feature.
Once activated, delivery of boiling water
becomes totally disabled. Chilled water
can be dispensed normally.
During this mode, the red, hot, icon will remain
o. To activate, refer to Options & Operation,
Safety Switch Settings, page 5.
—Holiday mode
Holiday Mode is provided to save energy
when the unit will not be used for long periods.
In this mode both the water chiller and water
heater are disabled and the unit will use
very little power. Pressing the Pressure
Relief button places the unit in Holiday Mode.
The unit will exit Holiday Mode if either the
power is turned o then on or if any of the
levers are pressed. The Self Learning Timer
will ignore user behaviour while the unit is in
Holiday Mode and resume normal operation
when the mode is terminated. Holiday Mode
is indicated by the star & moon icon being
illuminated. See page 6 for icon images.
4
Loading ...
Loading ...
Loading ...