Loading ...
Loading ...
Loading ...
COOKTOP USE
Fire Hazard
Do not let the burner flame extend beyond the
edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in
death or fire.
Electric ignitors automatically light the surface burners when
control knobs are turned to LITE.
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or while the grate
is vacant.
To Set
1. Push in and turn knob counterclockwise to LITE.
All four surface burners will click. Only the burner with the
control knob turned to LITE will produce a flame.
2. Turn knob anywhere between HI and LO. Use the following
chart as a guide when setting heat levels.
SETTING RECOMMENDED USE
LITE • Light the burner.
HI
Mid-range
(between HI and LO)
LO •
Power Burner
(left front burner)
• Start food cooking.
• Bring liquid to a boil.
• Hold a rapid boil.
• Quickly brown or sear food.
• To fry chicken.
• Maintain a slow boil.
• Fry or saut6 foods.
• Cook soups, sauces and gravies.
Keep food warm.
To simmer.
SURESIMMER TM
(right rear burner)
• Provide highest heat setting
• Provide lowest simmer/heat
setting.
• Melt chocolate or butter.
REMEMBER: When range is in use or (on some
models) during the Self-Cleaning cycle, the entire
cooktop area may become hot.
I
Power failure
In case of prolonged power failure, the surface burners can be lit
manually. Hold a lit match near a burner and turn knob
counterclockwise to LITE. After burner lights, turn knob to
setting.
Power Burner
The left front burner is designed to give ultra-high power when it
is turned to HI. It can be used to rapidly bring liquid to a boil and
to cook large quantities of food. On some models both front
burners are Power Burners.
The Cooktop Lockout prevents unintended use of the surface
burners. When the cooktop is locked out, the surface burners
cannot be turned on by the control knobs.
The cooktop will remain locked after a power failure if it was
locked before the power failure. If the product loses power,
appliance will automatically go into the lockout position. The
surface burners cannot be activated until power is restored and
the Cooktop Lockout is disengaged.
To Lock/Unlock Cooktop:
Before using, turn all control knobs to OFF. Press and hold the
TOP keypad for 5 seconds until a single tone and "Loc on" will
appear on the display. After 5 seconds, "Loc On" will disappear
from the display, and a picture of the cooktop will appear.
Repeat to unlock cooktop. "Loc OFF" will appear on the display
for 5 seconds and the picture of the cooktop will disappear from
the display.
7
Loading ...
Loading ...
Loading ...