Loading ...
Loading ...
Loading ...
Route the new belts (deck belt first) as shown in Remount the belt guards removed earlier.
Figure 14 or Figure 15.
Engine Pulley
Left Hand Pulley
PTO Idler Bracket
(mounted on tractor)
LTX-1842
_Deck Belt (Bottom)
PTO Belt (Top)
Right Hand Pulley
(beneath belt guard)
Deck Idler Pulley
Center Pulley
NOTE: Left hand belt cover not shown for clarity.
Self-Tapping Screws
Figure 14
Engine Pulley
PTO Idler Bracket
(mounted on tractor)
LTX-2146
I_ Deck Belt (Bottom)
PTO Belt (Top)
Right Hand Pulley
beneath belt guard)
Left Hand
Double Pulley
NOTE: Left hand belt cover not shown for clarity.
Center Pulley
Figure 15
ChangingtheTransmissionDriveBelt
WARNING: Be sure to shut the engine off,
remove ignition key, disconnect the spark
plug wire(s) and ground against the engine to
prevent unintended starting before removing
the belt(s)
All belts on your tractor are subject to wear and should
be replaced if any signs of wear are present.
IMPORTANT:The V-belts found on your tractor are
specially designed to engage and disengage safely. A
substitute (non-OEM) V-belt can be dangerous by not
disengaging completely. For a proper working machine,
use factory approved belts.
To change or replace the drive belt on your tractor
proceed as follows:
Remove the cutting deck as instructed eadier in this
section.
22
Loading ...
Loading ...
Loading ...